>> << >>
Главная Выпуск 30 NewConcepts Chapters
4 New Concepts in Technologies*

Двумерная химия произведет технологическую революцию

By Amos Zeeberg for New York Times
Октябрь 2020

 

A vacuum chamber for using X-ray spectroscopy to measure sample materials, the tiny squares of various colors, on a copper sample holder, at Berkeley National Laboratory’s Advanced Light Source in California.

In recent years, internet-connected devices have colonized a range of new frontiers — wrists, refrigerators, doorbells, cars. But to some researchers, the spread of the “internet of things” has not gone nearly far enough.

“What if we were able to embed electronics in absolutely everything,” Tomás Palacios, an electrical engineer at the Massachusetts Institute of Technology, said recently. “What if we did energy harvesting from solar cells inside highways, and had strain sensors embedded in tunnels and bridges to monitor the concrete? What if we could look outside and get the weather forecast in the window? Or bring electronics to my jacket to monitor my health?”

In January of 2019, Dr. Palacios and his colleagues published a paper in Nature describing an invention that would bring that future a little closer: an antenna that can absorb the ever-thickening ambient soup of Wi-Fi, Bluetooth and cellular signals and efficiently turn it into usable electrical energy.

The key to the technology is a promising material: molybdenum disulfide, or MoS₂, deposited in a layer just three atoms thick. In the world of engineering, things can’t get much thinner.

And thin is useful. For instance, a layer of MoS₂ could wrap around a desk and turn it into a laptop charger, without any power cords.

As researchers like Dr. Palacios see it, two-dimensional materials will be the linchpin of the internet of everything. They will be “painted” on bridges and form the sensors to watch for strain and cracks. They will cover windows with transparent layers that become visible only when information is displayed. And if his team’s radio wave-absorber succeeds, it will power those ever-present electronics. Increasingly, the future looks flat.

 
  • Thanks for reading The Times.
Subscribe to The Times
 

“There’s been absolutely explosive interest,” said Jeff Urban, a 2-D materials researcher at the Molecular Foundry at Lawrence Berkeley National Laboratory, in California. “There’s no other way to characterize it.”

Image
For Tom&aacute;s Palacios, an engineer at M.I.T., the future of electronics lies in flatness.
Credit...Tony Luong for The New York Times
Image
M.I.T. engineers created tiny electronic circuits made of graphene, a 2-D form of carbon.
Credit...Tony Luong for The New York Times
Image
Dr. Palacios with a vial of a few thousand microelectronic graphene circuits.
Credit...Tony Luong for The New York Times
Image
Yuxuan Lin, a researcher in Dr. Palacios’ lab, readying equipment to work with the 2-D circuits.
Credit...Tony Luong for The New York Times

The craze for 2-D chemistry began in 2004, when two researchers at the University of Manchester used cellophane tape to peel one-atom-thick layers of carbon from chunks of graphite, forming graphene. Graphene is identical to graphite and diamond in composition, but the thinness gives it very different properties: It is flexible, transparent, extremely strong and an exceptional electrical and thermal conductor.

Researchers quickly set out to make all kinds of new and improved gadgets from it. Recently several companies released headphones with diaphragms — the vibrating membranes that produce sound in audio devices — made of graphene. Some paint manufacturers are adding graphene to their formulas to make longer-lasting coatings. Last October Huawei introduced the Mate 20 X, a large, powerful cellphone that uses graphene to help cool the processor. Samsung used graphene to develop a faster-charging battery, which may appear in phones in the near future.

Dr. Urban is working with 2-D materials to improve fuel cells, which have drawn interest as a clean propulsion system for green vehicles. Most fuel cells generate electricity from hydrogen, but even under high pressure hydrogen gas takes up several times more space than a comparable amount of gasoline, making it impractical to use in automobiles.

Instead, Dr. Urban is embedding hydrogen atoms in solids, which are much denser than gases. In March, he and his colleagues announced a new storage medium: tiny magnesium crystals wrapped in narrow strips called graphene nanoribbons. Hydrogen stored in this manner, they found, could provide nearly as much energy as the same volume of gasoline, while weighing much less.

Dr. Urban compared the process to baking chocolate chip cookies, where magnesium is the chocolate chip — the key part — because it holds the hydrogen. “We want a chocolate chip cookie with as many chocolate chips as possible,” he said, and graphene nanoribbon makes excellent cookie dough. The nanoribbon also helps hydrogen enter and exit the magnesium crystals quickly while boxing out oxygen, which competes with hydrogen for space in the crystals.

Dr. Urban peers into the super-thin realm at the Advanced Light Source, a domed laboratory with an expansive view of San Francisco and the neighboring bay. There, electrons are accelerated to near the speed of light, generating powerful X-rays that can be used to finely probe the atomic structure of materials.

At the A.L.S., Dr. Urban and his colleagues learned exactly how graphene wrapped around and bonded tightly to magnesium. Those bonds, they believe, are what make the composite material stable over long periods — an important trait for real-world use.

Image
The Advanced Light Source, in Berkeley, Calif., produces X-rays to probe the atomic structure of 2-D materials.
Credit...Anastasiia Sapon for The New York Times
Image
Jeff Urban, a 2-D materials researcher at the Molecular Foundry at Lawrence Berkeley National Laboratory, in California.
Credit...Anastasiia Sapon for The New York Times
Image
A scientist prepared soft X-ray transmission thin windows for constructing in-situ/operando reaction cells. These experimental reaction cells allow soft X-ray spectroscopy to measure the super-thin materials in various environments, with gases or liquids, for instance, or interacting with sunlight or electrochemical conditions.
Credit...Anastasiia Sapon for The New York Times
Image
Beamline scientist Dr. Yi-Sheng Liu, a close collaborator with Dr. Urban’s team, used a joypad to control the position of a sample of tiny materials to be measured with a soft x-ray beam at the Advanced Light Source.
Credit...Anastasiia Sapon for The New York Times

Elsewhere, researchers are taking super-thin layers of materials and stacking them into three-dimensional blocks that have properties distinct from both 2-D and conventional 3-D materials.

Kwabena Bediako, a chemist at the University of California, Berkeley, published a study last year in Nature that described how he and his colleagues had embedded lithium ions between many layers of two-dimensional materials, including graphene.

“We start out with a piece of bread, slap on some mayo, bring it down on cheese, bring it down on some ham,” he said. “You can do that as many times as you want and create a sandwich.”

By varying the different layers in the three-dimensional stack, the researchers were able to fine-tune how the materials stored lithium, which could lead to the development of new, high-capacity batteries for electronic devices.

Xining Zang, a postdoctoral candidate in materials science at M.I.T., recently discovered a surprisingly easy way to build stacks of 2-D materials using gelatin, the ingredient that gives Jell-O and marshmallows their structure. She and several colleagues combined gelatin, metal ions and water. The gelatin assembled itself into layers (as it does when it forms Jell-O), thereby arranging the metal ions into layers, too. Some of the carbon in the gelatin then reacted with the metal to produce two-dimensional sheets of metal carbides; these worked as catalysts to help split water into oxygen and hydrogen, a process that could be employed to generate electricity in fuel cells.

“I hesitate to say the technique was crude, because it was really elegant when you think about it,” said Nate Hohman, a staff scientist formerly at the Molecular Foundry and an author on the paper. “It’s right at this interface between high-tech and low-tech.”

One place where two-dimensional materials are blossoming is in Singapore, in the lab of Liu Zheng, at Nanyang Technological University. Singapore is known as the Garden City, and the tiny country has zealously filled its land with greenery — including at the university, which has placed gardens in spare nooks all around its modern buildings.

Dr. Zheng sees his research as a different kind of cultivation. “I’m a gardener,” he said. “There is a 2-D garden, with all kinds of flowers. They’re all beautiful.”

Last year Dr. Zheng and his colleagues drastically expanded this garden by creating dozens of new 2-D materials from a class of compounds called transition metal chalcogenides, or T.M.C.s. The key discovery was in using ordinary table salt to lower the temperatures at which the metals are typically melted; this allowed the metals to be vaporized and deposited in thin films.

Image
In the lab of Liu Zheng, at Nanyang Technological University, layers of 2-D materials are deposited on silicon wafers and stored in containers.
Credit...Amos Zeeberg
Image
Nanyang Technological University, in Singapore. “I am a gardener,” Dr. Zheng said. “There is a 2-D garden, with all kinds of flowers. They’re all beautiful.”
Credit...Amos Zeeberg
Image
In Dr. Zheng’s lab, a chemical vapor deposits 2D layers on silicon wafers placed in quartz tubes, under tightly controlled conditions.
Credit...Amos Zeeberg
Image
Gauges for carefully controlling and monitoring the flow of gases into the quartz tubes in Dr. Zheng’s lab.
Credit...Amos Zeeberg

“One day a student told me, ‘I can make all of the T.M.C.s with salt,’” Dr. Zheng said. “I was really surprised. This was my dream for many years.”

One set of shelves in Dr. Zheng’s busy lab is stacked with clear, airtight containers; these hold silicon wafers, on which the 2-D materials are deposited. The films often form a visible triangle or hexagon, according to the geometric structures of the crystals in each material.

After the films are deposited, Dr. Zheng’s team moves to a nearby lab to study the resulting structures in detail. The room is dominated by a transmission electron microscope that stands a dozen feet tall and weighs a ton and a half — a giant device for viewing individual atoms.

Many T.M.C.s, including the MoS₂ used by Dr. Palacios to absorb radio waves, show potential for various industrial uses. The two-dimensional platinum selenide made in the Singapore lab could make for cheaper fuel cells, which typically use the precious metal platinum to separate a hydrogen atom’s proton from its electron. Switching to two-dimensional platinum selenide could reduce the amount of platinum used by 99 percent, Dr. Zheng said. Nanyang Technological University is in talks with manufacturers about commercializing the technology. The future isn’t yet two-dimensional, but it’s getting closer.

“I see really great commercial potential of this material,” Dr. Zheng said. “We can make a huge impact in the market.”

 
 
 
Imagea flexible thermoelectric device made in Dr. Urban&rsquo;s lab, made from 2-dimensional carbon nanosheets. Thermoelectric devices harvest thermal energy from the environment and turn it into useful electrical energy.
Credit...Anastasiia Sapon for The New York Times

Читайте также:

Room-Temperature Superconductivity Achieved for the First Time

Physicists have reached a long-sought goal. The catch is that their room-temperature superconductor requires crushing pressures to keep from falling apart.

В решении одной из важнейших для человечества проблем опреснения морской воды Израиль стал мировым лидером

В условиях постоянного роста числа людей на Земле и все возрастающего дефицита пресной воды получение пресной воды из морской путем ее опреснения становится одной из важнейших для всего человечества. Для некоторых стран в далекой перспективе, для других таких как Иран, Саудовская Аравия, Израиль и многих других без решения её выживание невозможно. Создав революционно новые технологии, Израиль решил эту проблему, став мировым лидером. Израиль не только опресняет морскую воду, но и перерабатывает 86% своих сточных вод для использования в сельском хозяйстве. Более 50% воды, используемой для домашних, сельскохозяйственных и промышленных нужд, производится искусственно. По определению  газеты «Нью-Йорк Таймз» еврейское государство является «гигантом опреснения» и  «сверхдержавой десалинизации.  Публикуемая статья рассказывает о том, как решена эта проблема в стране, в которой дефицит воды в течение тысячелений казался неразрешимой проблемой.

Революционные достижения технологий минувшего десятилетия

Технологии развиваются с огромной скоростью — если в 2010 году 3D-принтеры, способные печатать металлом и пластиком, системы оплаты покупок лицом и тотального распознавания лиц казались фантастикой, то в 2019 году они уже стали нормой. «Хайтек» вместе с VK запускает специальный проект о самых интересных технологических инновациях за последнее десятилетие.

New Zealand Is About to Test Long-Range Wireless Power Transmission

Now, if New Zealand startup Emrod has its way, Tesla and Marconi’s dreams may merge. The company is building a system to wirelessly beam power over long distances.

Добавить комментарий

Оставлять комментарии могут только зарегистрированные пользователи.
Войдите в систему используя свою учетную запись на сайте:
Email: Пароль:

напомнить пароль

Регистрация